Advertisement
Quick Links
USA
SERVICE OFFICE
Dometic Corporation
2320 Industrial Parkway
Elkhart, IN 46516
574-294-2511
CANADA
Dometic Corporation
46 Zatonski, Unit 3
Brantford, ON N3T 5L8
CANADA
519-720-9578
For Service Center
Assistance Call:
800-544-4881
SERVICE INSTRUCTIONS
Form No. 3311157.000 12/06
©2006 Dometic Corporation
LaGrange, IN 46761
This manual must be read and under-
stood before installation, adjustment,
service, or maintenance is performed.
This unit must be installed by a quali-
fied service technician. Modification of
this product can be extremely hazard-
ous and could result in personal injury
or property damage.
When ordering parts, always state:
MODEL NO. - PRODUCT NO. - QUANTITY -
PART NUMBER - DESCRIPTION
For Electric Details also state:
VOLTAGE - WATTAGE
Lire et comprendre ce manuel avant de
procéder à l'installation, à des réglages, de
l'entretien ou des réparations. L'installation
de cet appareil doit être effectuée par un
réparateur qualifié. Toute modification de
cet appareil peut être extrêmement dan-
gereuse et entraîner des blessures ou dom-
mages matériels.
MODEL
975XXXX.X00(#)
976XXXX.X00(#)
Series
Advertisement
Related Manuals for Dometic Oasis
Summary of Contents for Dometic Oasis
- Page 1 être extrêmement dan- 800-544-4881 ous and could result in personal injury gereuse et entraîner des blessures ou dom- or property damage. mages matériels. MODEL 975XXXX.X00(#) SERVICE INSTRUCTIONS 976XXXX.X00(#) Series Form No. 3311157.000 12/06 ©2006 Dometic Corporation LaGrange, IN 46761...
-
Page 2: General Information
OASIS 976XXXX.XX0(#) & OASIS ELITE 976XXXX.XX0(#) SERVICE INSTRUCTIONS Safety Instructions GENERAL INFORMATION This manual has safety information and instructions to help users eliminate or reduce the risk of acci- dents and injuries. These instructions must be read and under- stood before installation of this kit. This kit... - Page 3 OASIS 976XXXX.XX0(#) & OASIS ELITE 976XXXX.XX0(#) SERVICE INSTRUCTIONS 6. Replace the lead rail in reverse of steps 4 and 5. 7. When the fabric and lateral arms are in place check alignment of the lead rail as follows: Lateral arms under spring tension are a.
- Page 4 OASIS 976XXXX.XX0(#) & OASIS ELITE 976XXXX.XX0(#) SERVICE INSTRUCTIONS STRAPS TAPE FIG. 4 4. Use a square bit drive to remove the caps from both end of the lead rail, Save to reinstall on the 7. After removing the lead rail. Remove the deco- lead rail.
-
Page 5: Drive Replacement
OASIS 976XXXX.XX0(#) & OASIS ELITE 976XXXX.XX0(#) SERVICE INSTRUCTIONS 16. When the fabric and lateral arms are in place FIG. 9 check alignment of the lead rail as follows: End Bracket a. Location of arm wrist from the end of the... - Page 6 OASIS 976XXXX.XX0(#) & OASIS ELITE 976XXXX.XX0(#) SERVICE INSTRUCTIONS d. Take motor assembly out of roller tube FIG. 14 and set on work area to unscrew the two socket head capscrews and two cross head Motor screws. See figure 12. Sleeve Notch FIG.
-
Page 7: Top Cover Replacement
OASIS 976XXXX.XX0(#) & OASIS ELITE 976XXXX.XX0(#) SERVICE INSTRUCTIONS drive to remove the three screws securing FIG. 17 the end bracket to the back channel and top Top Cover cover. Using a socket drive remove the ad- ditional 4 screws. See figures 9, Back 4.
Need help?
Do you have a question about the Oasis and is the answer not in the manual?
Questions and answers