Ayre QX-5 Owner's Manual page 39

2) Scroll to the desired input by pressing the
right and left arrow buttons on the control ring.
Once the desired input is shown on the display
(INPUT XXX 0), press the right-hand button
on the right-hand side of the display.
3) The input name and number for the input
(NAME XXX 0) will be displayed to the right-
hand side of the display. Press the right-hand
arrow on the control ring twice so that the display
reads: NAME CUST.
4) Press the right-hand button on the right-hand
side of the display. The display will now read:
CUST.
5) Begin scrolling through possible character
choices by pressing the + / – buttons at the top
and bottom of the control ring. The blinking dot
"." will indicate the selected character field.
6) Once the desired character is displayed, simply
press the right arrow button on the control ring to
move the blinking dot to the next character field.
7) Now press the left-hand button until you've
exited the Setup Menu, or until you reach the
next item you would like to configure.
38