Table of Contents
Advertisement
20
Ensure NO Ethernet cable is
connected.
3) Turn the QX-5 Twenty on via the rocker switch
on the rear panel. The unit will now enter System
Sleep Mode.
4) Enter the Setup Menu by holding down
the left-hand button until MAIN INPUT is
displayed.
5) Scroll to MAIN NET by using the right or
left arrows on the control ring on the right-hand
side of the faceplate.
6) Press the right-hand button. The screen will
now display NET AP.
7) Press the right-hand button. The screen will
now display AP START.
8) Press the right-hand button. The display will
now show moving dots, indicating that AP Mode
is engaged.
9) Using your phone/tablet, find the wireless
network "Ayre QX-5" on its list of available
networks.
10) Enter the QX-5 Twenty's network password,
which is "password".
11) Turn on the mconnect app.
Advertisement
Table of Contents
