Ayre QX-5 Owner's Manual page 37

become active, and the Analog Audio Outputs
For more information on the
from the rear panel of the unit will be muted. In
available headphone outputs
order to re-engage the Analog Audio Outputs,
refer to the "Headphone
simply press the headphone button once again.
Output" section, (pg. 7).
This will mute the headphone output (but
will remember the last volume level you were
using) and flow of signal from the Analog Audio
Outputs on the rear panel will resume.
Disabling Inputs
Use of the QX-5 Twenty may be streamlined if all
unused inputs are disabled in the Setup Menu.
1) Once in the Setup Menu, the first choice
available will read MAIN INPUT. Select this
option by pressing the right-hand button on
the right-hand side of the display. The input
name and number (INPUT XXX 0) will be
displayed.
2) Scroll to the desired input by pressing the
right and left arrow buttons on the control ring.
Once the desired input is shown on the display
(INPUT XXX 0), press the right-hand button
on the right-hand side of the display.
3) The input name and number (XXX 0
NAME) will be displayed. Press the right-hand
button once more.
4) The name and number (NAME XXX 0) of
the input will be displayed.
36