Table of Contents
Advertisement
5) Press the right-hand button to bring the unit
out of System-sleep mode.
6) Access the mconnect control app through your
phone or tablet.
7) In the mconnect app, go to its Settings Menu
(
symbol in the left-hand corner) select
"Device Setup".
8) Select "Ayre QX-5" from the device list.
9) Select "Wi-Fi network selection."
10) Find your home network on the list and select
it.
11) Type in your home network password.
A notice will appear on your phone/tablet,
indicating: "The device is attempting to connect
to the network". Press OK.
12) Disconnect the Ethernet cable, now the unit
will connect via the wireless network.
IP Address
1) Access the Setup Menu, see (pg. 10). You will
see the words MAIN INPUT on the display.
2) Press the arrow on the right-hand side of the
control ring until the words MAIN NET are
displayed.
24
Advertisement
Table of Contents
