Ayre QX-5 Owner's Manual page 10

AyreLink connections are
made with commonly
available two-line telephone
line cords using modular
(RJ-11) connectors. (These
are the cords that connect
the telephone set to the wall
in many countries.) They are
readily available in different
lengths and various colors at
most electronics stores.
AyreLink
The linked components may
be joined in any convenient
AC Power
The QX-5 Twenty may be plugged directly into
an unswitched wall outlet. Although proprietary
RFI (radio-frequency interference) filtering is
built into the product, in some situations an AC
power-line filter (such as those offered by Ayre)
may provide additional sonic benefits.
AyreLink Ports
The AyreLink communication system provides a
convenient way to control your audio system.
There are two AyreLink ports on the rear panel
of the QX-5 Twenty. Each port has four contacts
and contains both an input and an output.
Both ports function identically and may be used
interchangeably.
The linked components should be connected in
daisy-chain fashion, connecting each component
to another until all of the linked components have
been connected. Be careful not to connect the
two ends of the chain. Closing the chain to form
a loop will cause the AyreLink system not to
order.
function.
Be sure to use two-line telephone
cords to make AyreLink connections.
These can be identified by the four
gold contacts on each connector.
9