Table of Contents
Advertisement
WARNING:
Any other use is forbidden.
The GB704SH-5 series are pneumatic-hydraulic installation tools designed specifically for the efficient installation of blind fasteners.
They can be operated in any position. They have a rated pull load of 3,300 lbs. (14.68 kN) with 90 psi (6.2 bar) air pressure at the air inlet.
The GB704SH-5 and GB704SR installation tools offer a unique "split" system providing the operator with an ergonomic tool with reduced
hand held weight. The handle and head cylinder assembly when held in hand weighs 2.0 lbs. (.90 kg).
The GB704SH-5 series installation tools operate on 90 to 100 psi (6.2-6.9 bar) of air pressure, with 90 psi. (6.2 bar) providing the maximum
efficiency. At 90 psi (6.2 bar) of air pressure, the GB704SH-5 series does not exceed 81.5 dB(A) and consumes .30 SCF/cycle (8.50 L/cycle).
The air inlet is provided with 1/4-18 female pipe thread to accept the users air hose fitting.
NOSE ASSEMBLIES ARE NOT FURNISHED WITH TOOL AND MUST BE ORDERED SEPARATELY. (See nose assembly selection chart on pg. 20).
WARNING:
Do not operate in an explosive atmosphere.
The GB704SH-5 can be operated between 0ºF - 118º (-17.8ºC / 47.8ºC)
GB704SH-5 PNEUDRAULIC INSTALLATION TOOL..
DESCRIPTION
ENVIRONMENTAL USE
SPECIFICATIONS
Hand Held Weight
- 2.00 lbs. (.90 kg)
Air pressure req'd
- 90-100 psi. (6.2-6.7 bar)
Air consumption
- .30 SCF/cycle (8.50 L/cycle)
Hydraulic oil
- Automatic Transmission Oil,
Setting stroke
- .600" (15.24 mm)
Noise level
- Less than 81.5 dB(A)
Rated pull load
- 3,300 lbs. (14.68 kN)
Vibration
- Tested– No Hazards Found
4
Dexron® III, or equivalent.
12/21 REV 4/22
Advertisement
Table of Contents
