Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Gage Bilt GB703SR8V
Summary of Contents for Gage Bilt GB703SR8V
- Page 1 ORIGINAL INSTRUCTIONS GB703SR8V INSTALLATION TOOL GAGE BILT TOOLS ARE AVAILABLE WORLDWIDE E-MAIL US FOR A DISTRIBUTOR NEAR YOU. GAGE BILT 44766 Centre Court, Clinton Twp., MI. 48038 USA Ph: +1 (586) 226-1500 Fax: +1 (586) 226-1505 MADE in USA solutions1@gagebilt.com / www.gagebilt.com...
-
Page 2: Table Of Contents
Description and Technical Specifications ..........................4 Description of Functions ................................5 Warnings ....................................6 Principle of Operation ................................7 How to set-up the GB703SR8V ..............................8 How to use the GB703SR8V ..............................9 Maintenance and Hydraulic Thread Preparation ........................10 Filling ....................................... 11 Bleeding .................................... -
Page 3: Eu Conformity And Warranty
GAGE BILT DECLARATION OF CONFORMITY MANUFACTURER: Gage Bilt Inc. 44766 Centre Ct., Clinton Twp., Michigan U.S.A. +1(586-226-1500) WE DECLARE THAT THE EQUIPMENT SPECIFIED HEREIN CONFORMS TO THE FOLLOWING DIRECTIVES AND STANDARDS Machinery Directive 2006/42/EC EN ISO 12100:2010 EN ISO 13849-2:2012... -
Page 4: Description And Technical Specifications
At 90 psi (6.2 bar) of air pressure, the GB703SR8V does not exceed 81.5 dB(A) and consumes .30 SCF/cycle (8.50 L/cycle). The GB703SR8V comes with 8 feet (2.4 m) of hose. The air inlet is provided with 1/4 - 18 female pipe thread for accepting the user's air hose fitting. -
Page 5: Description Of Functions
Head Cylinder Assembly Vacuum Bottle-Bushing assembly Bleed Screw Grip Hydraulic Hose “Pull” Actuator Lever Assembly Air Line Bleed Screw Vacuum Tube Flow_Speed control valve Handle Assembly Air Inlet Vacuum Image may not reflect actual tool GB703SR8V INSTALLATION TOOL. Rev. 4/23... -
Page 6: Warnings
4. Support the weight of the tool in a stand, tensioner or balancer, because a lighter grip can then be used to support the tool. GB703SR8V INSTALLATION TOOL. Rev. 4/23... -
Page 7: Principle Of Operation
Piston Rod Assembly moves up Piston Rod Assembly moves down Air Piston moves up Air Piston moves down Air exhaust Air exhaust Pressurized Oil Unpressurized Oil Pressurized Air Unpressurized Air Images may not reflect actual tool GB703SR8V INSTALLATION TOOL. Rev. 4/23... -
Page 8: How To Set-Up The Gb703Sr8V
HOW TO SET-UP THE GB703SR8V WARNING: Only qualified and trained operators must install, adjust or use the assembly power tool for non-threaded mechanical fasteners. WARNING: Operator MUST read and understand all warnings and cautions. WARNING: It is required that eye protection, hearing protection and safety boots be worn at all times while handling this equipment. -
Page 9: How To Use The Gb703Sr8V
HOW TO USE THE GB703SR8V WARNING: Only qualified and trained operators must install, adjust or use the assembly power tool for non-threaded mechanical fasteners. WARNING: Operator MUST read and understand all warnings and cautions. WARNING: It is required that eye protection, hearing protection and safety boots be worn at all times while handling this equipment. -
Page 10: Maintenance And Hydraulic Thread Preparation
WARNING: Tool must be maintained in a safe working condition at all times and examined on a daily basis for damage or wear. Any repair must be done by qualified personnel trained on Gage Bilt procedures. WARNING: Excessive contact with hydraulic oil and lubricants must be avoided. -
Page 11: Filling
Proceed to bleeding instructions on pg. 12 to remove air from hydraulic system. Fill Bottle (745263) Handle Assembly and Power Cylinder hole Oil Passage hole O’ring (S832) ***Keep air hole free from oil*** Images may not reflect actual tool. GB703SR8V INSTALLATION TOOL. Rev. 4/23... -
Page 12: Bleeding
Subtract dim “B” from dim “A”. If stroke is not consistent within 1/64" (.396 mm) repeat bleeding procedure until stroke met. For your consideration, Gage Bilt offers a depth gage (Pt.# A-1935) to help simplify and more accurately check your tool stroke. -
Page 13: Troubleshooting & How To Clean Vacuum Regulator
Image may not reflect Note: The vacuum regulator may visually appear clean, but still may be actual tool contaminated with a thin film, therefore, the steps above should 4) S.H.C.S. be performed to assure best performance. Fitting GB703SR8V INSTALLATION TOOL. Rev. 4/23... -
Page 14: Overhaul
Perform overhaul in a clean, well lit area using care not to scratch or nick any smooth surface that comes in contact with an o'ring. Use of Lubriplate® (Gage Bilt part no. 402723) or other lubricant is recommended during reassembly to prevent tearing or distorting of o'rings. - Page 15 Thread the actuator assembly-air (704130) all the way into manifold head (744306) with fingers. Insert and turn 5/8” open end box wrench / adjustable wrench and snug tight approximately 1/4 - 1/2 turn. Re-attach the actuator lever assembly (724017) with pin. GB703SR8V INSTALLATION TOOL. Rev. 4/23...
- Page 16 If ports are plugged, use needle nose pliers to grasp end of spring (744144), turning clockwise and pulling to dislodge from groove in casting. Valve spring installation tool (744251) will facilitate the proper installation of the spring (744144). Valve sleeve (743144) can be pulled out using valve sleeve removal tool (744152). GB703SR8V INSTALLATION TOOL. Rev. 4/23...
-
Page 17: Parts Lists
PARTS LIST GB703SR8V INSTALLATION TOOL. Rev. 4/23... - Page 18 PARTS LIST GB703SR8V INSTALLATION TOOL. Rev. 4/23...
-
Page 19: Dexron® Iii Oil Safety Data (Sds)
Use material for its intended purpose or recycle if possible. Oil collection services are available for used oil recycling or disposal. Place contaminated materials in containers and dispose of in a manner consistent with applicable regulations. GB703SR8V INSTALLATION TOOL. Rev. 4/23... -
Page 20: Nose Assembly Selection Chart / Accessories
GB703SR8V ACCESSORIES Approved for use on Gage Bilt CE installation tools and/or other manufacturer’s CE approved tools of similar design. (Sold Separately) *Apply Vibra-tite® part # 405125 to all nose assembly threads and allow it to set 20 minutes prior to assembly. - Page 21 6N-703-18 and spare nose tip (10202) and follower (40307) to convert to 4N-703-18 nose assembly. All other nose tips must be ordered separately. When ordering tool fastener specific, contact Gage Bilt for more information.
- Page 22 5ft Hyd. Hoses are recommended with use of Backpack Additional custom lengths are available. GB703SR8V ACCESSORIES Cont. Approved for use on Gage Bilt CE installation tools and/or other manufacturer’s CE approved tools of similar design. (Sold Separately) Catcher Bag-Stem Fill Bottle...
- Page 23 This page intentionally left blank GB703SR8V INSTALLATION TOOL. Rev. 4/23...
- Page 24 Riveter Kits Available (Sold Separately) Gage Bilt offers a wide selection of standard and custom kits tailored to your needs. Contact us for more information. Approved Split Riveter Tool Backpacks For 5ft hose Split System Tools. (Sold Separately) DEXRON® IS A REGISTERED TRADEMARK OF GENERAL MOTORS CORPORATION. LUBRIPLATE® IS A REGISTERED TRADEMARK OF FISKE BROTHERS REFINING. LOCTITE® IS A REGISTERED TRADEMARK OF HENKEL CORPORATION.
Need help?
Do you have a question about the GB703SR8V and is the answer not in the manual?
Questions and answers