10. Using the arrow keys, select Performance or Security from the Optimize Array For: field. Depending
on the number of available drives connected to the controller, the following RAID array options are
available:
Drive
Options
Number
1
Performance
Only
2
Performance or
Security
3
Performance or
Security
4
Performance or
Security
For more information about RAID levels refer to the FastTrak S150 TX4 User Manual.
11. After selecting your options, hold down Ctrl and press Y to save your configuration.
CAUTION: Initializing a drive destroys any existing data.
Ä
12. When the "Do you want to do quick initialize or create only?" message displays, press Y, if you
selected the Performance option. Press I, if you selected the Security option to Create and Quick
Initialize.An additional prompt displays confirming your Quick Initialize selection. Press Y to
confirm and begin the quick initialization.
13. Press any key to reboot the system.
Restoring the System
These instructions apply only to installation Scenario 1. If you have an installation Scenario 2, proceed to
the "Installing the Driver" later in this document.
1. Insert the first Restore CD that came with your system into the CD drive.
2. Select the language and type of operating system for your system and follow the on-screen
instructions to finish the system restore process.
NOTE: During this process, the system reboots a couple of times and may ask for the operating system
CD and other supplemental CDs. This process could take up to a few hours.
3. When you see the Microsoft Windows "Welcome" screen, you have successfully completed the
restore process.
Mode
1+0 stripe
2+0 stripe or 1x2 mirror
3+0 stripe or 1x2 mirror + 1
spare
4+0 stripe or 2x2 mirror/stripe
Description
Single Drive. No actual RAID
performance benefit and not
recommended.
2 Drives Stripe for Performance.
Drives Mirror for Security.
3 Drives Stripe for Performance.
Mirror with a spare failover drive.
4 Drives Stripe for Performance.
2 sets of 2 mirror drives for
security.
Security option gives both
Performance and Security.
7
Need help?
Do you have a question about the xw6000 and is the answer not in the manual?
Questions and answers