Cisco 7970 Series Phone Manual page 28
For cisco callmanager 4.1(3)
Hide thumbs
Also See for 7970 Series:
- Phone manual (92 pages) ,
- Setting up (15 pages) ,
- Quick reference (2 pages)
Table of Contents
Advertisement
If you want to...
Dial from a corporate
directory web page
Dial using a headset
Receive notification
when a busy or
ringing extension
becomes available
Dial on a secondary
line
Make a priority
(precedence) call
Dial from a Personal
Address Book (PAB)
entry or Fast Dial
code
Place a call using a
billing or tracking
code
20
Then...
Use the Cisco WebDialer feature. Open a web browser and go to your
company directory. Click on a phone number in the directory. Click Dial to
place the call. Click Hangup to end the call. See the Customizing Your Cisco
IP Phone on the Web guide for more details:
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/index.htm
Do one of the following:
• If
is unlit, press it before or after dialing, re-dialing, or speed-dialing
a number.
• If
is lit, press New Call, Redial, a speed dial button, or
button). If necessary, enter a phone number and press Dial.
Call the number and press CallBack while listening to the busy tone or ring
sound. Hang up. When the extension becomes available, your phone will
provide you with an audio and visual alert. (The call back to this number is
not automatic; you must place the call.) CallBack is a special feature that
your system administrator might configure for your phone. Note that
CallBack will fail if the other party has call forwarding enabled.
Press
for the line that you want to use.
Enter the MLPP access number (provided by your system administrator)
followed by the phone number. For more details, see the "Prioritizing Critical
Calls" section on page 35.
Choose
> PAB service or Fast Dial service (exact names might vary).
To dial from a listing, press it or scroll to it and go off-hook. For help
subscribing to the PAB or Fast Dial service, see the "Accessing Your User
Options Web Pages" section on page 43.
Dial a number and enter a client matter code (CMC) or a forced
authorization code (FAC) when prompted by a distinctive tone. Your system
administrator will tell you if you need to enter CMC or FAC codes and can
provide you with detailed instructions.
(a line
78-15630-03
Hide quick links:
Advertisement
Table of Contents
