How To Pick Up Calls Within Your Group - Cisco 7940 Series User Manual

Using Speed Dial
Step 1
Step 2
Step 3
Step 4
Step 5
Tip
Using Speed Dial
Note
Cisco IP Phone 7960 and 7940 Series User Guide
3-12
Procedure
Press any available line button.
Press the GPickUp softkey.
Dial the required call pickup group number.
Answer the incoming call that is redirected to your phone.
To pick up a call using a different call pickup group number, hang up and begin
again at Step 1.
If there is more than one incoming call involved when you activate group call
pickup, you receive the first unanswered call. If there is no unanswered call in the
group, or if you dial an invalid group number, you receive a fast busy tone.
Related Topics
Storing and Retrieving a Call Using Call Park, page 3-9
•
How to Pick Up Calls Within Your Group, page 3-11
•
The buttons to the right of the LCD screen on your Cisco IP Phone can be used as
phone lines or as speed dial buttons, as determined by your system administrator.
You can assign phone numbers and text labels to speed dial buttons using the
Cisco CallManager User Options web pages.
Unlike the Fast Dial feature (see the
Speed Dial does not require subscribing to or using a service.
If you are using one or more Cisco IP Phone 7914 Expansion Modules, you can
access extra speed dial or line buttons. To configure speed dial buttons for your
Expansion Module, follow the steps in the procedure below.
Chapter 3 Placing a Call and Other Basic Phone Tasks
"Using Fast Dials" section on page 5-12),
78-10182-08