Redialing The Last Number Dialed; Storing And Retrieving A Call Using Call Park - Cisco 7940 Series User Manual

Chapter 3 Placing a Call and Other Basic Phone Tasks
Step 3
Step 4

Storing and Retrieving a Call Using Call Park

Step 1
Step 2
Step 3
78-10182-08
To verify the status of the call back notification, press the CallBack softkey while
your phone is idle.
A confirmation message displays.
Press the Exit softkey to close the confirmation screen or press the Cancel softkey
to cancel call back notification.
When the extension you called is available to receive a call, you receive an audio
and visual alert from your phone. Press Dial to dial the number.
Related Topics
Placing a Call, page 3-2
•
• Answering a Call, page 3-4
Ending a Call, page 3-4
•
Redialing the Last Number Dialed, page 3-8
•
Park a call when you want to store the call before retrieving it from another phone
in the Cisco CallManager system (for example, a phone in someone else's office
or in a conference room). Call park numbers are pre-configured for this purpose
by your system administrator.
Procedure
During an active call, press the more softkey until you see the Park tab.
Press Park. The LCD screen displays the special call park number at which the
call is stored. If the screen does not display a call park number, the call park
feature is not available to you.
Make a note of the call park number, then hang up. The call is parked at that
number, allowing you to retrieve it from another phone.
Cisco IP Phone 7960 and 7940 Series User Guide
Making Telephone Calls
3-9