Using The Feature Buttons - Cisco 7940 Series User Manual

Using the Handset, Headset, and Speakerphone
Using the Handset, Headset, and Speakerphone
Using the Handset
Adjusting the Handset Rest
Cisco IP Phone 7960 and 7940 Series User Guide
1-12
Related Topics
• A Road Map to Your Cisco IP Phone, page 1-6
Using the Feature Buttons, page 1-10
•
Your Cisco IP Phone works with a handset, headset, or speakerphone.
For information on using each of these, refer to the following sections:
Using the Handset, page 1-12
•
Adjusting the Handset Rest, page 1-12
•
Using the Speakerphone, page 1-14
•
• Using the Headset, page 1-14
The handset on your Cisco IP Phone functions in the same way as a handset on a
traditional phone:
To place and answer calls with the handset, simply lift the handset.
•
To hang up, place the handset back in its cradle.
•
• To switch from the handset to the speakerphone, press the Speaker button on
the front of your phone during a call, then hang up the handset.
Related Topics
• Adjusting the Handset Rest, page 1-12
Adjusting the Handset, Speakerphone, and Headset Volume, page 2-1
•
If you mount your Cisco IP Phone on the wall or use the footstand on the phone,
you can adjust the handset rest to ensure the receiver will not slip out of the cradle.
To adjust the handset rest, follow the steps and refer to
Chapter 1 Introducing Your Cisco IP Phone
Figure 1-3.
78-10182-08