Removing Bezel Blanks - HP xw4000 Hardware Reference Manual

Hardware Upgrades

Removing Bezel Blanks

Ä
✎
2–6
1. If you have locked the Smart Cover Lock, use Computer Setup to
unlock the lock.
2. Shut down the operating system properly, then turn off the
computer and any external devices. Disconnect the power cord
from the power outlet and disconnect any external devices.
3. Remove the computer access panel. Remove the front bezel.
4. Gently pull the subpanel, with the bezel blanks secured in it,
away from the front bezel, then remove the desired bezel blank.
CAUTION: Hold the subpanel straight when you pull it away from the
front bezel. Pulling the subpanel away at an angle could damage the pins
that align it within the front bezel.
Removing Bezel Blanks from the Subpanel
When replacing the subpanel, ensure that the aligning pins and any
remaining bezel blanks are in their proper orientation.
Hardware Reference Guide