Changing From A Desktop To A Minitower Configuration - HP xw4000 Hardware Reference Manual

Changing from a Desktop to a Minitower
Configuration
Hardware Reference Guide
1. Shut down the operating system properly, then turn off the
computer and any external devices. Disconnect the power cord
from the power outlet and disconnect any external devices.
2. Remove the computer access panel as described in the section
"Removing the Computer Access Panel."
3. Remove the front bezel as described in the section "Removing the
Front Bezel."
4. Disconnect all power and data cables from the drives in the
5.25-inch drive bays.
5. To release the drives from the 5.25-inch drive bay, press the short
(yellow) drivelock 1 as shown.
Activating the Drivelock (Shown from the Rear of the Chassis)
Product Features
1–11