Grounding Methods - HP xw4000 Hardware Reference Manual

Electrostatic Discharge

Grounding Methods

✎
E–2
There are several methods for grounding. Use one or more of the
following methods when handling or installing electrostatic-sensitive
parts:
■
Use a wrist strap connected by a ground cord to a grounded
workstation or computer chassis. Wrist straps are flexible straps
with a minimum of 1 megohm +/-10 percent resistance in the
ground cords. To provide proper ground, wear the strap snug
against the skin.
■
Use heelstraps, toestraps, or bootstraps at standing workstations.
Wear the straps on both feet when standing on conductive floors
or dissipating floor mats.
■
Use conductive field service tools.
■
Use a portable field service kit with a folding static-dissipating
work mat.
If you do not have any of the suggested equipment for proper
grounding, contact your HP authorized dealer, reseller, or service
provider.
For more information on static electricity, contact your HP authorized
dealer, reseller, or service provider.
Hardware Reference Guide