Removing The Computer Access Panel - HP xw4000 Hardware Reference Manual

Hardware Upgrades

Removing the Computer Access Panel

Ä
2–4
Before removing the access panel, lay the computer down on its large
base for greater stability.
1. If you have locked the Smart Cover Lock, see the previous
section on Smart Cover Lock or use Computer Setup to unlock it.
2. Shut down the operating system properly, then turn off the
computer and any external devices.
3. Disconnect the power cord from the power outlet and disconnect
any external devices.
CAUTION: Before removing the computer access panel, ensure that the
computer is turned off and that the power cord is disconnected from the
electrical outlet. Loosen the two screws that secure the access panel to the
computer chassis.
4. Slide the access panel back about 1 inch (2.5 cm), then lift it up
and off the unit.
Removing the Computer Access Panel
To replace the access panel, reverse steps 1-4.
Hardware Reference Guide