Changing From A Desktop To A Minitower Configuration - HP Compaq dc7100 MT Hardware Reference Manual

Product Features
Changing from a Desktop to a Minitower
Configuration
1–10
1. If you have locked the Smart Cover Lock, restart the computer
and enter Computer Setup to unlock the lock.
2. Turn off the computer properly through the operating system and
turn off any external devices. Disconnect the power cord from the
power outlet and disconnect any external devices.
3. Remove the computer access panel as described in the
"Removing the Computer Access Panel"
4. Remove the front bezel as described in the
Bezel" section.
5. Disconnect all power and data cables from the back of the drives
in the 5.25-inch drive bays.
6. To release the drives from the 5.25-inch drive bay, press down
on the short yellow drivelock as shown. While pressing the
drivelock, pull the drives out of the drive bay.
Releasing the 5.25-inch Drives from the Drive Bays (Desktop)
www.hp.com
section.
"Removing the Front
Hardware Reference Guide