Factory Reset; Installer Access - Hitachi RWM-2R1E Installation & Operation Manual

UNIT CONTROLLER

7.13.9 Factory reset

This function is only visible for the installer. It asks for removing all the settings and returns to the factory setting configuration.

7.13.10 Installer access

Menu to enable the access to configure the system.
The login password for the Installer is:
Right , Down , Left , Right
Press "OK" to confirm the password.
If the correct access code is entered, the installer mode icon appears on the notifications bar (bottom line).
After 30 minutes of inactivity, it is necessary to repeat the log in process. To exit the Installer mode and return to the unit menu, go to
the "Return to user mode" on the main menu.
106 PMML0575 rev.1 - 09/2021