Timer And Schedule Configuration - Hitachi RWM-2R1E Installation & Operation Manual

YUTAKI CASCADE CONTROLLER
Detailed information about Solar combination:
• Operation (Demand ON/OFF)
• Solal Panel temperature
Shows a list of the alarm history of the system

8.13.2 Timer and schedule configuration

?
N O T E
Timer settings are only valid if the corresponding zone is in ON state at the time of execution of the respective timer program.
The LCD controller must be set to the correct date and time before using the timer function.
Select the desired area to apply the timer function or delete all timers configuration:
Heating/Cooling (Water): To set
the timer to adjust the water working
conditions for Circuit 1/2.
To set the timer to adjust the swimming
pool temperature.
Press OK button to reset scheduled
timers.
123 PMML0575 rev.1 - 09/2021
3 / 3
1 / 2
2 / 2
Detailed information about
Communication status:
• H-Link
• H-Link Central
• RCS Central
• Cascade Controller
Heating/Cooling (Air): To set the
timer to adjust the room temperature
for Room 1/2. Only when using room
thermostats.
Is possible to launch a timer assistant.
To set the timer to adjust the hot water
tank temperature.
To set the Override type:
• Until next action
• Specific time
• Forever