Table of Contents
Advertisement
YUTAKI CASCADE CONTROLLER
•
Enable or disable the desired modules (module 1 is enabled
by default)
•
Select Next and press OK button.
•
Enable or disable the individual DHW for each module.
•
Select Next and press OK button.
•
Configure thermostat (1 or 2): None, wired or wireless.
•
Check RT address if wired is selected.
•
Select Wireless binding ID (1 or 2) if wireless is selected.
•
Configure Fan coils: Deactivated, cooling, heating or heat &
cool if wired is selected.
•
Select Wizard complete and press OK button.
114
PMML0575 rev.1 - 09/2021
•
Select Yes to complete the configuration.
•
Press OK button to go to the main screen.
Advertisement
Table of Contents
