Verifying System Operation; Filling Out The Return - HP Visualize J280 Supplementary Manual

Verifying System Operation

To verify the system operation, follow these steps:
1.
Reconnect the power cables and any other cables that were disconnected when
opening the workstation.
2.
Power on the system.
When the system is booted for the first time, you are prompted for the LAN ID.
Enter the LAN ID that you recorded in the section, "Powering Off the System".
Note the status message on the LCD display. Once the power on diagnostics have
completed and the system has booted, the second line on the LCD display should
read "HP J280."
If the system fails to boot or power up refer to the Solving Problems chapter of the
J 280 Owners Guide.
f you have any questions, suggestions, or problems with our
I
hardware, software, or documentation, please call 1–888–301–5932
(US & Canada) or contact the HP Response Center for your country.
Filling Out the Return Form and Returning Original Parts
Follow the instructions on the Hewlett Packard Upgrade Return Instructions sheet
included with the upgrade return kit. You must return the original parts to Hewlett
Packard according to those instructions.
25