HP Visualize J280 Supplementary Manual page 6

EtherLAN ID ______________________–_____________________
You must supply the dash (–) between the first six digits and the last six digits.
3.
Power down the system.
4.
Unplug the system unit power cord and the power cords of any peripheral
devices from ac wall outlets.
5.
Unplug the system unit power cord from the ac input connector at the back of
the system unit.
WARNING: To avoid electrical shock, make sure that you unplug the
power cable from the wall outlet and the system unit before
proceeding further.
CAUTION: The internal components of the workstation are sus-
ceptible to mechanical and electrostatic shock. To
prevent such damage from occurring, observe the
following precautions during the installation proce-
dure:
Stand on static–free mat
Wear a static–grounding wrist strap to ensure that any
accumulated electrostatic charge discharges from
your body to ground. Attach the static–grounding
wrist strap by following the instructions on the pack
age that contains the strap. Be sure to attach one end
of the strap to the system chassis.
5