Emissions Regulations Compliance; Electrostatic Discharge (Esd) Precautions - HP Visualize J2240 Upgrade Instructions

J class workstations

Hide thumbs Also See for Visualize J2240:

Table of Contents

Emissions Regulations Compliance

Any third–party I/O device installed in HP system(s) must be in accordance with the

requirements set forth in the preceding Emissions Regulations statements. In the

event that a third–party noncompliant I/O device is installed, the customer assumes

all responsibility and liability arising therefrom.

Electrostatic charges can damage the integrated circuits on printed circuit boards. To

prevent such damage from occurring, observe the following precautions when un-

packing and installing the board.

Stand on a static–free mat.

Wear a static strap to ensure that any accumulated electrostatic charge dis-

charges from your body to ground.

Connect all equipment together, including the static–free mat, static straps,

routing nodes, and peripheral units.

Keep uninstalled printed circuit boards in their protective antistatic bags.

Handle printed circuit boards by their edges, once you have removed them

from their protective antistatic bags.

Table of Contents

Do you have a question about the Visualize J2240 and is the answer not in the manual?