HP Visualize J2240 Upgrade Instructions page 35

J class workstations

Hide thumbs Also See for Visualize J2240:

Table of Contents

Before installing the cover on the J2240 PCI/EISA Assembly, if you installed

an EISA or graphics board that is taller than a PCI card remove the small

break–off block from the cover that corresponds to that slot. Refer to Figure 17,

which shows the block removed for Slot 0.

Figure 17. Remove Block from J2240 PCI/EISA Assembly Cover

Table of Contents

Need help?

Do you have a question about the Visualize J2240 and is the answer not in the manual?