Installing Memory Dimms - HP Visualize J2240 Upgrade Instructions

Installing Memory DIMMs

Install the memory DIMMs in the new J2240 Main Tray as described in the
following procedure:
1.
To install a memory DIMM, open the ejector tab and line the DIMM up with
the guides as shown in Figure 7, making sure to put the notched end toward the
white ejector handle. READ NOTICE below and follow slot guide shown in
Figure 7.
2.
Close the ejector tabs.
3.
Press firmly and evenly on the DIMM to ensure that it is fully seated.
Notched end
Close the ejector tabs.
Push firmly and evenly
Figure 7. Installing Memory DIMMs
16