HP Visualize c200 Install Manual page 6

Cpu upgrade

Hide thumbs Also See for Visualize c200:

Preparing Your Workstation

5 When the workstation has completed shutting down, power off the monitor, and

WARNING:

To avoid electrical shock, make sure you unplug the power cable from

the wall outlet and the system unit before proceeding any further.

6 Unplug the power cord of the system unit, the monitor, and any peripheral devic-

7 Unplug the power cord from the back of the system unit.

8 If your monitor is sitting on top of the system unit, remove the monitor from the

CAUTION:

Remove the monitor from the top of the system unit to prevent possible damage to

the system unit or the monitor while performing this upgrade.

any peripheral devices connected to the workstation.

es from AC wall outlets.

top of the system unit and set it aside.

Table of Contents

Need help?

Do you have a question about the Visualize c200 and is the answer not in the manual?

Visualize c200/c240 ssp C240