HP Visualize c200 Install Manual page 18

Cpu upgrade

Hide thumbs Also See for Visualize c200:

Installing the Main Tray Assembly

NOTE:

There will be a one to two minute delay, while the self-tests complete, before any

monitor activity occurs. Power saving monitors may switch to their power saving

mode during this time

9 Pack the old CPU board back in the antistatic bag and place it in the upgrade kit

NOTE:

If there are no monitor signals present on any graphics port, the default monitor is

Serial Port 1 (see Figure 11 for connector location). Connect a terminal to Serial Port

1 and use the Boot Console Handler to determine the graphics monitor configuration.

This concludes the hardware upgrade.

box and use the documentation provided to return the old parts to Hewlett-Pack-

ard for credit.

Table of Contents

Need help?

Do you have a question about the Visualize c200 and is the answer not in the manual?

Visualize c200/c240 ssp C240