HP Visualize c100 Install Manual page 30

Installing the New Main Tray Assembly
14 If you take no action and autoboot is set (normal mode), the following is dis-
played on the screen:
Processor is booting from first available device. To
discontinue, press any key within 10 seconds.
To stop the process, and get into the Boot Console Handler to configure an
optional graphics card, if you have one, press:
ENTER
15 Configuring the Optional Graphics Card
To enter the configuration menu, enter the following command at the prompt:
co
A To list all the available options, enter the following at the prompt:
mo graphics list
B To configure in an optional graphics card, in slot 3 for example, type:
mo graphics(3) n
Where n is the type monitor.
C Select n from the list shown.
Then press:
ENTER.
The new monitor type is now saved.
D After you have selected and saved the correct monitor type, you can configure
the console path to it by returning to the Main Menu prompt by entering:.
ma
Then type:
pa con graphics(n)
where n is zero for the built-in graphics or n is the slot number for the
optional graphics card
E To save the console path press:
ENTER.
28