Download Print this page

Bornack FS92 User Manual page 10

Advertisement

CLEANING
• Dry damp personal protective equipment in
the air, not on artificial heat sources. Dry
metal components with cloths.
• If disinfection is necessary, please contact the
e-mail hotline:
info@bornack.de
• If the personal protective equipment comes
into contact with salt-water, keep it wet until
it can be rinsed with plenty of distilled water.
• Use compressed air to blow on the unit if
necessary.
LIFE SPAN
Metal parts are not subject to age-related life
span deadlines. The expert makes a decision
about these parts based on his technical exper-
tise.
For reasons of safety, intensive use and/or
extreme application conditions such as sharp
edges, chemical influences etc. will reduce the
usage period. The company owner needs to
take this into account in the workplace risk
analysis.
The test card at the end of this user manual
must be presented during the regular expert
inspections and be completed by an expert.
For more details, please visit www.bornack.de.
OTHER
REPAIRS
• For reasons of liability, repairs may only be
carried out by BORNACK or in a workshop
authorised in writing by BORNACK.
• Only original spare parts from the manufac-
turer may be used.
STORAGE
• Dry wet PPE before storage.
• Store in a dry place away from direct sunlight.
• Do not store PPE near radiators. Permanent
exposure to temperatures above +50 °C has a
negative impact on the strength of the textile
material and shortens the life span.
• Do not allow PPE to come into contact with
aggressive substances (e.g. oils, grease, acids,
chemicals). Precision mechanics oils may be
applied to moving metallic parts during main-
tenance. Always ensure that textile PPE
components do not come into contact with
the oil.
• Do not store personal protective equipment
close to aggressive substances (see above)
because even the vapours of aggressive
substances can have a negative effect on the
strength of the PPE.
• Protected storage in the device case or device
bag.
TRANSPORT
• Protected transport in the device case or
device bag.
10 | 11
EN

Advertisement

loading

This manual is also suitable for:

Fs90Fs51