Displaying The Far Site's Name When The Call Connects; Hearing Audio Confirmation When You Dial; Adjusting For Strong Room Lighting - Polycom VSX Series Getting Started Manual

Displaying the Far Site's Name When the Call Connects

Hearing Audio Confirmation When You Dial

Adjusting for Strong Room Lighting

© Polycom, Inc.
Choose this setting...
Off
Remote
4. Press Home to save your change and return to the Place a Call screen.
With this option, you can specify whether to display the far site's name when the
call connects and how long to leave the name on the screen. You can also choose
not to display the far site name.
To specify when to display the name of the far site:
1. Go to System > User Settings and then select
2. Select the Far Site Display Time box and press
name during the entire call, for a specified time, or not at all.
Press Home to save your change and return to the Place a Call screen.
3.
You can set up the system to speak each digit as you enter it on the Place a Call
screen.
To enable audio confirmation:
1. Go to System > User Settings and then select
2. Select Keypad Audio Confirmation and press
3. Press Home to save your change and return to the Place a Call screen.
You can use the backlight control to adjust the brightness of the video that the main
camera sends to the VSX system. Brightness controls adjust the camera's iris to take
in less light. In most situations, you do not need to use the Backlight Compensation
setting. However, adjusting brightness can be helpful when the room arrangement
results in strong light coming from behind the people in the picture.
To show the PIP...
Only when you press
When you pick up the remote.
Customizing Your Workspace
PIP.
to see more settings.
to display the far site's
to see more settings.
to check the box.
21