Customizing Your Workspace; Allowing The Far Site To Control Your Camera; Specifying When To Display The Pip - Polycom VSX Series Getting Started Manual

VSX S G S G
ERIES ETTING TARTED UIDE

Customizing Your Workspace

Allowing the Far Site to Control Your Camera

Specifying When to Display the PIP

20
Your system administrator may have configured the system to let you customize
what you see on the screen. These options can be changed before calls are placed
and also when the system is in a call.
Allowing the far end to control your camera lets the other participants adjust what
they see. Far-end participants can also set and use presets for your camera, if their
system supports this.
To allow the far site to control your camera:
1. Go to System > User Settings.
2. Select the Far Control of Near Camera box and press
3. Press Home to save your change and return to the Place a Call screen.
Changing this setting takes effect immediately, even if a call is in progress.
You can specify how the PIP appears when the call connects. After the call
connects, you can show, move, or hide the PIP, regardless of this setting.
To specify when to display the PIP:
Go to System > User Settings and then select
1.
Select PIP.
2.
3. Press and choose one of the settings shown in this table.
Choose this setting...
Auto
On
To show the PIP...
On connection and when you press any of the
camera control buttons.
On connection and during the call.
to check the box.
.
www.polycom.com/videodocumentation