Class A Notice For Fcc - Cisco 500 Series Safety Information Manual

Cisco systems router regulatory compliance and safety information
Hide thumbs Also See for 500 Series:
Table of Contents

Advertisement

Specification
Telecom (ADSL)
For specific details about the years, revisions and relevant amendments please refer to the applicable
declaration of conformity available at http://www.cisco.com.
This section includes the EMC Class A warnings for the Cisco Secure Router 520 Series. It contains the
following:

Class A Notice for FCC

Modifying the equipment without Cisco's authorization may result in the equipment no longer
complying with FCC requirements for Class A digital devices. In that event, your right to use the
equipment may be limited by FCC regulations, and you may be required to correct any interference to
radio or television communications at your own expense.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
OL-12893-01
Standards Compliance (continued)
Regulatory Compliance and Safety Information for the Cisco Secure Router 500 Series
Description
AS/ACIF S041
AS/ACIF S043
RTTE Directive (199/5/EC)
ITU-G.992.1
ITU-G.992.3
ITU-G.992.5
HKTA 2032
HKTA 2033
I_DCA_18_02
Res. 225-540-788
RRL No.2005-96
PTC 270
OA-105
ETR-328
IDA TS ADSL
ADSL01 Taiwan
EMC Class A Notices and Warnings
37

Advertisement

Chapters

Table of Contents
loading

Table of Contents