Table of Contents
Advertisement
CAUTION
Always ensure that the thread of the hose (or
swivel) is compatible with the thread of the
Accu-Shot dispenser.
7. Apply thread sealant to the male threads of the hose
fitting, thread the hose fitting into the fitting (2) of the
Accu-Shot, and tighten firmly. See Fig. 2.
Note: Make sure you let the sealant cure to the manu-
facture's recommendations before the system is pres-
surized with grease.
2
Fig. 2
8. Open all dispense position shut-off valves, and start
the pump to pressurize the system. See the Opera-
tion section for proper operation of meter.
9. To ensure dispensing accuracy, purge all air from
the fluid lines and the dispense valve before using.
Grounding
Proper grounding is an essential part of maintaining a
safe system.
To reduce the risk of static sparking, ground all system
components according to local and national electrical
codes. Refer to the user manuals for the pump and other
system components, and ground the following:
•
Pump: follow the manufacturer's recommendations.
•
Fluid hoses: use only grounded hoses.
6
Hose Fitting
•
Air compressor: follow the manufacture's recom-
mendations.
•
Fluid supply container: follow the local code.
To maintain grounding continuity when flushing or reliev-
ing pressure, always hold a metal part of the valve firmly
to the side of a grounded metal pail, then trigger the
valve.
Grease Dispenser Components
KEY
DESCRIPTION See Fig. 3
A
Accu-Shot grease extension tube
B
Measurement and recording of grease deliv-
ered by internal oval gear metering chamber
and control electronics
C
The delivery control valve is activated by a
steel lever provided with a safety lock. It is
designed to control the flow of grease at high
pressure
D
The valve grip contains the electronic power
supply battery housing
E
Display
F
Hose connection fitting
G
Dispensing lever control knob
A
G
B
C
D
F
Fig. 3
Installation
E
309454C
Advertisement
Table of Contents
