Table of Contents
Advertisement
PRESSURIZED EQUIPMENT HAZARD
Spray from the gun, hose leaks, or ruptured components can splash fluid in the eyes or on the skin and
cause serious injury.
•
Do not point the spray gun at anyone or at any part of the body.
•
Do not stop or deflect fluid leaks with your hand, body, glove, or rag.
•
Follow the Pressure Relief Procedure on page 4 when you stop spraying and before cleaning,
checking, or repairing equipment.
•
Check hoses and couplings daily. Replace worn, damaged, or loose parts immediately.
•
Tighten all fluid connections before each use.
FIRE AND EXPLOSION HAZARD
Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition and result
in a fire or explosion and serious injury.
•
Ground the equipment and the object being dispensed to. Refer to "Grounding" on page 6.
•
If there is any static sparking or you feel an electric shock while using this equipment, stop dispens-
ing immediately. Do not use the equipment until you identify and correct the problem.
•
Provide fresh air ventilation to avoid the buildup of flammable fumes from solvents or the fluid being
dispensed.
•
Keep the dispense area free of debris, including solvent, rags, and gasoline.
•
Do not smoke in the dispense area.
•
Do not turn on or off any light switch in the dispense area while dispensing or while operating if
fumes are present.
•
Keep a fire extinguisher in the work area.
FLUID INJECTIONHAZARD
If high-pressure fluid pierces the skin, the injury might look like "just a cut" but is a serious wound. Get
immediate surgical treatment.
•
Always shut off power and relieve pressure before you service or clean fluid dispenser, remove
parts, or repair leaks. See Pressure Relief Procedure page 4.
•
Keep clear of tip, and never point dispenser at yourself or anyone else.
309454C
WARNING
3
Advertisement
Table of Contents
