HP Vectra VL420 Upgrade Manual page 40

Hp vectra vl420: supplementary guide

Hide thumbs Also See for Vectra VL420:

Table of Contents

5 Remove the two screws from the side of the tray and remove the old floppy drive.

2 screws

6 Align the new floppy drive in the tray and screw it into place.

7 Replace the drive tray in the PC.

8 Attach the data and power connectors.

9 Replace the PC's cover. Refer to page 14.

10 Verify the new configuration by checking the HP Summary Screen. To access the Summary Screen,

press

when the HP logo appears during startup, then select the summary screen option.

Note

Ensure that you have installed all the required operating system and HP drivers on the newly installed drive. To reinstall operating

system and HP drivers, use the Recovery CD-ROMs provided with the PC. In addition, you can find the most up-to-date versions of HP

drivers on HP's Web site at:

www.hp.com/go/support

Table of Contents