Replacing The Battery - HP Vectra VL420 Upgrade Manual

Hp vectra vl420: supplementary guide

Hide thumbs Also See for Vectra VL420:

Table of Contents

Upgrading and replacing hardware

Replacing the battery

WARNING

There is a danger of explosion if the battery is incorrectly installed. For your safety, never attempt to recharge,

disassemble or burn the old battery. Replace the battery only with the same or equivalent type recommended by the

manufacturer. The battery in this PC is a lithium battery which does not contain heavy metals, nevertheless, in order to

protect the environment, do not dispose of batteries in household waste. Please return used batteries to the shop from

which you bought them, or to the dealer from which you purchased your PC, or to HP, so that they can either be recycled

or disposed of in an environmentally sound way. Returned used batteries will be accepted free of charge.

1 Switch off the PC and remove the PC's cover. Refer to page 12, page 13 or page 14.

2 Remove the old battery by pressing the retaining clip with a flat-headed screwdriver and lifting the

battery clear.

3 Place the new battery in the battery holder, with the "+" sign on top and ensure that it is properly

seated.

4 Replace the PC's cover. Refer to page 12, page 13 or page 14.

battery

Table of Contents