HP Vectra VL420 Upgrade Manual page 21

Hp vectra vl420: supplementary guide

Hide thumbs Also See for Vectra VL420:

Table of Contents

Upgrading and replacing hardware

6 Align the new drive in the tray (with the correct orientation), and tighten the screws.

Caution

Take care when handling the hard drive. A small drop can damage it.

7 Slide the drive tray back into the PC.

8 Attach the data and power connectors.

9 Replace the PC's cover. Refer to page 12.

10 Verify the new configuration by checking the HP Summary screen. To access the HP Summary Screen,

press F8 then Esc when the HP logo appears during startup.

Note

Ensure that you have installed all the required operating system and HP drivers on the newly installed drive. To reinstall operating

system and HP drivers, use the Recovery CD-ROMs provided with the PC. In addition, you can find the most up-to-date versions of HP

drivers on HP's Web site at:

www.hp.com/go/vectrasupport

Table of Contents