Removing And Replacing The Pc's Cover - Small Form Factor Models - HP Vectra VL420 Upgrade Manual

Upgrading and replacing hardware

Removing and replacing the pc's cover - small form factor models

WARNING
For your safety, disconnect the power cord and all external cables.
1 Switch off the monitor and PC, disconnect all power cords and any telecommunication cables.
2 If necessary, unlock the cover (with the key) at the rear of the PC.
3 Open the latch and remove the cover.
4 Remove the front panel (if you are adding a front-access device or hard disk).
5 Replace the cover by following the previous instructions in reverse order.
14