Upgrading and replacing hardware
6 Insert the new drive in the tray, then replace the side screws.
7 Slide the drive tray back into the PC.
8 Attach the data and power connectors.
9 Replace the PC's cover. Refer to page 13.
10 Verify the new configuration by checking the HP Summary Screen. To access the Summary Screen,
press
F8
when the HP logo appears during startup, then select the summary screen option.
Note
Ensure that you have installed all the required operating system and HP drivers on the newly installed drive. To reinstall operating
system and HP drivers, use the Recovery CD-ROMs provided with the PC. In addition, you can find the most up-to-date versions of HP
drivers on HP's Web site at:
.
www.hp.com/go/support
38