HP Vectra VL420 Upgrade Manual page 33

Hp vectra vl420: supplementary guide

Hide thumbs Also See for Vectra VL420:

Table of Contents

5 Fit the two guide pins into the holes in the drive, then push on the top of the drive until the drive is

securely held in place by the retaining clip.

guide pins

6 Slide the drive tray back into the PC until it clicks into place.

7 Attach all data and power connectors. If you are installing a CD-ROM, CD-RW or DVD drive, connect

the audio cable too.

power cable

8 Replace the PC's cover. Refer to page 14.

9 Verify the new configuration by checking the HP Summary screen. To access the HP Summary Screen,

press F8 when the HP logo appears during startup, then select the Summary option by pressing Esc .

Upgrading and replacing hardware

data cable

audio cable

Table of Contents