Replacing The Power Supply Unit - Small Form Factor Models - HP Vectra VL420 Upgrade Manual

Hp vectra vl420: supplementary guide
Hide thumbs Also See for Vectra VL420:
Table of Contents

Advertisement

Upgrading and replacing hardware

Replacing the power supply unit - small form factor models

1 Switch off the PC and remove the computer's cover. Refer to page 14.
2 Remove all internal power supply connectors.
3 Remove the two outside screws securing the power supply.
Screw positions
4 Slide the old power supply away from the rear of the PC and lift it out.
5 Insert the new power supply, making sure it is correctly in place.
6 Replace the two screws to secure the power supply.
7 Reconnect all internal power supply connectors.
8 Replace the cover. Refer to page 14.
9 Select the correct voltage setting for your country.
49

Advertisement

Table of Contents
loading

Table of Contents