HP Vectra VL420 Upgrade Manual page 36

Hp vectra vl420: supplementary guide

Hide thumbs Also See for Vectra VL420:

Table of Contents

Upgrading and replacing hardware

7 Align the new floppy drive in the upper part of the tray and secure it using the screws provided with

the drive.

8 Replace the drive bay in the PC.

9 Attach the screws to the front of the tray.

10 Attach all data and power connectors.

11 Replace the PC's cover. Refer to page 12.

12 Verify the new configuration by checking the HP Summary Screen. To access the Summary Screen,

press

when the HP logo appears during startup, then select the summary screen option.

Note

Ensure that you have installed all the required operating system and HP drivers on the newly installed drive. To reinstall operating

system and HP drivers, use the Recovery CD-ROMs provided with the PC. In addition, you can find the most up-to-date versions of HP

drivers on HP's Web site at:

www.hp.com/go/support

Table of Contents