If Your Keyboard Or Mouse Does Not Work; If Your Printer Does Not Work - HP Vectra VE5 2 User Manual

Windows 95
When you change the display type when using Windows 95, a confirmation box is displayed
prompting you to confirm the selection. However, if you have selected the wrong display type
and cannot read the screen message because the screen is blurred, the display type will
automatically return to the previous selection after approximately 15 seconds.
Other Display Problems
If the display image is not aligned with the screen, use the display's controls to center the
image. Refer to the display manual for instructions.
If the screens generated by the applications do not appear to be correct, check the application's
manual to find out which video standard is required. Also check your display manual to find out
which refresh rate is required. Use Setup, HP User Tools, or your operating system's
procedures to select the correct refresh rate.

IF YOUR KEYBOARD OR MOUSE DOES NOT WORK

• Ensure that the keyboard or mouse is correctly connected.
• Ensure that the mouse driver supplied with the preloaded software is installed correctly.
(Choose a Logitech® mouse driver in Windows SETUP.)
• Clean the mouse ball and rollers as shown in the figure below (use a non-residual contact
cleaner).

IF YOUR PRINTER DOES NOT WORK

• Make sure the printer's power switch is ON.
• Verify that the power cord is plugged into the power outlet and the printer.
Cleaning the mouse rollers
Cleaning the mouse ball