HP Vectra VE5 2 User Manual page 40

Hp vectra ve5 2: users guide

Hide thumbs Also See for Vectra VE5 2:

Table of Contents

Align the drive with the holes in the bottom of the PC. Support the drive with your hand

while securing the drive with the four screws provided.

Support the power supply with your hand and very carefully return the PC to the upright

position.

10 Connect the data and power cables to the rear of the drive. The connectors are shaped to

fit one way only . If you are not sure which connector to use, refer to "Connecting IDE

Devices" earlier in this chapter.

11 If a device was removed from the middle shelf, replace it.

12 If no device was removed from the middle shelf, replace the bezel.

Table of Contents

Vectra ve 5/xxx - 2 Vectra ve 5/xx series