HP Vectra VE5 2 User Manual page 12

To initialize your software
1 Switch on the display first, and then the PC (this will allow your PC to recognize the type
of display you have).
Switch on the Display
Then switch on the PC
NOTE
When the PC is switched on, the Vectra Logo is displayed. The PC performs a Power-On-
Self-Test (POST). Press [ESC] if you want to view the POST information.
If an error is detected during the Power-On-Self-Test, the PC will automatically display the
error. If this occurs, refer to "If a POST Message is Displayed" in chaper 5.
2 The software initialization routine starts. It displays the software license agreement, gives
you an opportunity to read Working in Comfort (ergonomic advice for computer users),
and then asks questions about the PC. For example:
• The name of the person who will use the PC and your company name. (If necessary,
the name of the user can be modified later.)
• The current date and time.
• The type of printer (for example, HP LaserJet 4M). This is shown on the front of the
printer. You also need to enter the connection used by the printer.
Do NOT switch OFF the PC while the software is
being initialized for the first time as this could cause
unexpected results.