Removing and installing the hard disk drive
You can replace or upgrade the hard disk drive.
The hard disk drive is a Serial ATA (advanced technology attachment) drive, which uses a narrow data
cable.
CAUTION:
an external storage device, such as a DVD. Failure to do so may result in data loss. After replacing the
hard disk drive, you need to run System Recovery using recovery discs to load the factory-installed files.
Removing the hard disk drive
1.
Complete the procedures to prepare the HP TouchSmart PC. See
PC on page
WARNING!
the power cord from the wall outlet, and allow the internal system components to cool before
touching them.
2.
Remove the computer stand by removing the four screws that secure it to the back of the computer.
20
Chapter 3 Removal and Replacement Procedures
Before removing the hard disk drive, back up any personal files on the hard disk drive to
7.
To reduce the risk of personal injury from electrical shock or hot surfaces, disconnect
Opening the HP TouchSmart