Stand Assembly; Back Cover - HP TouchSmart dx9000 Reference Manual

Stand assembly

1. Pull the stand up to a 90 degree position and push left on its latch to lock it in place.
2. Remove the memory cover.
3. Detach the four screws securing the stand to the computer.
4. Lift the stand off of the PC.
To install the stand, reverse the removal procedures.

Back cover

1. Remove the wireless keyboard and mouse receiver from its USB slot on the bottom edge of the
system.
2. Remove the I/O cover and the I/O cable guide.
16 Chapter 3 Removal and Replacement Procedures