3.
Remove the optical disc drive cover by lifting the bottom edge with your finger or a screwdriver,
and then rotating the cover out and away from the computer. There are several tabs and two guide
pins holding the cover in place, so be careful not to break the cover by applying too much force.
4.
Make sure the wireless keyboard and mouse receiver (A) has been removed. See
HP TouchSmart PC on page
Four of the screws are located along the bottom edge of the back cover, two are located on the
sides of the optical drive, and three are located in the connector area.
7. Remove the nine screws that secure the back cover to the chassis.
Removing and installing the hard disk drive
Opening the
21