Starting System Recovery From Recovery Discs - HP TouchSmart dx9000 Reference Manual

7. If you are prompted to back up files, and you have already done so, click No, and then click
Next.
8. System recovery begins. After system recovery is complete, the computer restarts.
9. Complete the registration process, and wait until you see the desktop.
10. Turn off the computer, reconnect all peripheral devices, and turn the computer back on.
11. Perform the procedure

Starting system recovery from recovery discs

This section contains the procedure for performing a system recovery from the recovery discs you
created as described in
NOTE: System Recovery deletes any data or programs that you created or installed after purchase.
Therefore, ensure you have backed up to a removable disc any data that you want to keep.
To perform a system recovery program using recovery discs:
1. If the computer is working, create a backup CD or DVD containing all the data files you want to
save. When you are done, remove the backup disc from the disc slot.
CAUTION:
2. Insert recovery disc #1 into the disc slot.
3. If the computer works, click the Windows Vista start button, click the Arrow button next to the
Lock button, and then click Shut Down.
– or –
If the computer is not responding, press and hold the On button for approximately 5 seconds, or
until the computer turns off.
4. Disconnect all peripheral devices from the computer, except the monitor, keyboard, and mouse.
5. Press the On button to turn on the computer.
6. A window may open, prompting you to choose between running system recovery from the discs or
from your hard drive.
7. Choose to run from the recovery discs, and then click Next.
8. In the Recovery Manager Welcome window, click the Advanced options button.
9. Click Recover your computer to its original factory condition, and then click Next.
10. If you are prompted to back up files, and you have already done so, click No, and then click
Next.
11. If you are prompted to insert the next recovery disc, do so.
12. When the Recovery Manager is finished, remove the last recovery disc.
13. Click Finish to restart the computer.
Performing the post-recovery procedure on page
Creating Recovery Discs on page
All data on the hard disk drive will be deleted. You will lose data if it is not backed up.
44.
40.
System Recovery Options 43